Description:

This error code is generated if the current in the supply line of the steering control valve (steer left) is too low, indicating that the circuit is open. An open circuit prevents the valve from receiving the necessary electrical signals to operate correctly.

Reaction:

When this error is detected, the control software will limit or disable certain functions to prevent potential malfunctions related to the open circuit.

Recommendations:

Inspect Wiring for Breaks:

• Check the wiring harness connected to the steering control valve for any signs of breaks, disconnection, or corrosion. Repair or replace any damaged wiring.

Test Continuity:

• Use diagnostic tools to test the continuity of the circuit. Ensure there are no breaks in the wiring.

Check Electrical Connections:

• Ensure all electrical connections are secure and free from corrosion. Clean or tighten connections as needed.

Replace Faulty Components:

• If a specific component, such as the valve or its wiring, is identified as faulty, replace it with a new, manufacturer-approved part.

Consult Technical Support:

• If the issue persists, consult technical support for further assistance.

Note:

Ensuring the continuity of the electrical circuit for the steering control valve is crucial for reliable vehicle operation. Regular inspection and maintenance can prevent open circuit-related issues from affecting system performance.