XSC 000701.02 – Incompatible Harness on Steering Control Unit (AutoTrac™)
XSC 000701.02 (XSC 701.02)
Code: 000701.02
Shortcode: 701.02
Description:
This error code, XSC 000701.02, indicates that the control unit is connected to an incorrect harness, which is incompatible with the steering control unit (AutoTrac™). This misconnection can lead to communication failures and improper operation of the steering system.
Reaction:
When this fault occurs, the control software will exhibit limited or no functionality, particularly affecting the steering control system and AutoTrac™ functionality.
Recommendations:
Verify Harness Connection:
- Ensure that the control unit is connected to the correct harness.
- Check for part numbers and compatibility information to confirm the harness is appropriate for the steering control unit.
Inspect Harness for Damage:
- Check the harness for any signs of damage, wear, or incorrect connections.
- Replace the harness if it is found to be incompatible or damaged.
Consult Technical Support:
- If the issue remains unresolved, contact John Deere technical support for further diagnostics and assistance.
- Provide information about the harness and control unit connections and any steps already taken to address the fault.
Note:
Using the correct and compatible harness for the steering control unit (AutoTrac™) is crucial for ensuring proper functionality and operation. Regular inspections and proper connections help maintain system reliability and performance.