Description:

This error code, XSC 523815.05, is generated when the current for the steering control valve (enable valve) is too low, indicating that the circuit is open. This low current can affect the proper functioning of the valve and the steering control system.

Reaction:

When this fault occurs, the control software will exhibit limited or no functionality, affecting the overall operation of the steering system.

Recommendations:

Inspect Electrical Connections:

• Check the wiring and connectors associated with the steering control valve for any signs of damage, corrosion, or loose connections.
• Ensure that there are no open circuits.

Monitor Current Levels:

• Use diagnostic tools to monitor the current supplied to the steering control valve in real-time.
• Identify and correct any deviations from the normal operating range.

Test Control Valve:

• Verify that the steering control valve itself is functioning properly.
• Replace the control valve if it is found to be faulty.

Check Wiring Continuity:

• Use diagnostic tools to test the continuity and integrity of the wiring circuit.
• Identify and correct any open circuits or high resistance points.

Update Control Software:

• Check for and install any available updates for the control software to address potential bugs or current regulation issues.

Consult Technical Support:

• If the issue persists, contact John Deere technical support for further diagnostics and solutions.
• Provide detailed logs of current readings and any steps already taken to address the fault.

Note:

Maintaining proper current levels is crucial for the reliable operation of the steering control valve. Regular inspections and maintenance of the electrical system can help prevent such faults.