This diagnostic trouble code is generated when the PTA control software registers a voltage value at the proportional solenoid valve 2 that does not correspond with the commanded working position of the hydrostatic unit. This indicates a general problem with…
- John Deere PTA codes
This diagnostic trouble code is generated when the PTA control software detects that the registered ratio between the transmission input speed and hydrostatic speed does not match the actual transmission output speed. This indicates a mechanical or hydraulic problem with…
PTA 523652.11 – Transmission Control Unit (AutoPowr/IVT) Connected to Wrong Wiring Harness Connector
John Deere PTA codesThis diagnostic trouble code is generated when the control software detects an erroneous signal in the circuit of the control unit identification during power-up after ignition ON, indicating that the transmission control unit (AutoPowr/IVT) is connected to the wrong wiring…


