This diagnostic trouble code is generated if a voltage higher than the expected value is registered at the output to the left outer worklight on the front of the roof, left turn-signal light on the front of the roof (SAE), or left extra-wide vehicle turn-signal light (SAE). This indicates that the circuit is open or…

READ MORE

This diagnostic trouble code is generated if the control software registers that the current at the output to the left worklight or left Xenon (HID) worklight on the cab frame is too high. This indicates a short circuit to ground.

READ MORE

This diagnostic trouble code is generated if the control software registers that the current at the output to the left worklight or left Xenon (HID) worklight on the cab frame is too low. This indicates that the circuit is open.

READ MORE

This diagnostic trouble code is generated if a voltage higher than the expected value is registered at the output to the left worklight or left Xenon (HID) worklight on the cab frame. This indicates that the circuit is open or shorted to 12 volts.

READ MORE

This diagnostic trouble code is generated if the control software registers that the current at the output to the left worklight on the cab frame is too high. This indicates a short circuit to ground.

READ MORE

This diagnostic trouble code is generated if the control software registers that the current at the output to the left worklight on the cab frame is too low. This indicates that the circuit is open.

READ MORE

This diagnostic trouble code is generated if a voltage higher than the expected value is registered at the output to the left worklight on the cab frame. This indicates that the circuit is open or shorted to 12 volts.

READ MORE

This diagnostic trouble code is generated if the current at the home position of the rear window wiper is too high. This indicates a short circuit to ground.

READ MORE

This diagnostic trouble code is generated if the voltage of CAN+ is too high, indicating a short to 12V.

READ MORE

This diagnostic trouble code is generated if there is an excessive error rate with transmitted CAN bus messages. This indicates a problem with the CAN bus network, possibly due to electrical interference, faulty components, or network overload.

READ MORE

This diagnostic trouble code is generated if there is an excessive error rate with received CAN bus messages. This indicates a problem with the CAN bus network, possibly due to electrical interference, faulty components, or network overload.

READ MORE