This fault code indicates that the application software has found invalid EEPROM parameters on the PTH control unit. This can result from improper calibration or corrupted memory.

READ MORE

This fault code indicates that the PTH software has either failed or does not exist on the PTH control unit. This can result from a faulty intelligent device or component within the control unit.

READ MORE

This fault code indicates that the PTH End Of Line (EOL) parameters are either missing or invalid for the current configuration. This can result in erratic, intermittent, or incorrect data being stored in the program memory.

READ MORE

This fault code indicates that the cruise control resume switch is experiencing voltage above the normal range or is shorted to a high power source. This typically means the resume switch is stuck in the ON position or there is a short circuit causing constant power to the switch.

READ MORE

This fault code indicates that both the cruise ON signal and the resume signal are being detected simultaneously by the PTH control unit. This abnormal condition can be caused by issues with the cruise control module or wiring problems.

READ MORE

This fault code indicates that the cruise control enable switch is experiencing voltage above the normal range or is shorted to a high power source. This typically means the cruise control switch is stuck in the ON position or there is a short circuit causing constant power to the switch.

READ MORE

This fault code indicates that both the cruise control enable switch and the max speed setting are active simultaneously, which is an abnormal condition. This could be due to issues with the cruise control module, wiring problems, or malfunctions in the power train hydrostatic control unit.

READ MORE

This fault code indicates that the transmission output shaft speed is above the acceptable range while in hitch assist mode. This could be due to issues with the MFWD speed sensor, wiring problems, or malfunctions in the power train hydrostatic control unit.

READ MORE

This fault code indicates that the high-idle engine speed is below the normal operating range at a moderately severe level. This can be due to significant calibration issues, sensor errors, or transmission control unit (TCU) malfunctions.

READ MORE

This fault code indicates that the low-idle engine speed is below the normal operating range at a least severe level. This can be caused by minor calibration issues, sensor errors, or TCU malfunctions.

READ MORE

This fault code indicates that the engine speed data is above the normal operating range at a moderately severe level. This can be due to more significant calibration issues, sensor errors, or TCU malfunctions.

READ MORE