This diagnostic trouble code is generated when there is a data transfer problem between the PL1 control software and the PL4 control software. This issue occurs when messages sent on the CAN Bus by the PL4 control software are intermittently received or not received at all. Possible causes include an open circuit in the CAN…

READ MORE

This diagnostic trouble code is generated when there is a data transfer problem between the PL1 control software and the PL3 control software. The issue may be due to intermittent or non-existent reception of messages sent on the CAN Bus by the PL3 control software. Possible causes include an open circuit in the CAN Bus,…

READ MORE

This diagnostic trouble code is generated due to a data transfer problem between the CCU control software and PL1 control software, indicating a problem in the CAN Bus or the transmitting control software.

READ MORE

This diagnostic trouble code is generated when the control software receives too many incorrect CAN Bus messages, indicating a general problem with the connection to the Drive Train CAN Bus (1000 kBd).

READ MORE

This diagnostic trouble code is generated when the control software is unable to process all received CAN Bus messages, possibly due to CAN Bus overload or an internal control unit fault.

READ MORE

This diagnostic trouble code is generated when the control software receives an excessively high number of incorrect CAN Bus messages or detects a severe problem in the connection to the vehicle CAN Bus (500 kBd).

READ MORE

This diagnostic trouble code is generated when the control software receives too many incorrect CAN Bus messages or detects a general problem in the connection to the vehicle CAN Bus (500 kBd). This could be due to communication errors, faulty wiring, or hardware issues.

READ MORE

This diagnostic trouble code is generated when the control software detects that the internal memory contains an incorrect entry related to driver calibration. This may be due to improper programming or memory corruption.

READ MORE

This diagnostic trouble code is triggered when the control software detects an incorrect entry in the internal memory. This error suggests that the memory may have been corrupted or improperly written.

READ MORE

This diagnostic trouble code is generated when the control software detects that too much time has elapsed, which is monitored by the watchdog timer. This indicates a potential internal fault or software hang.

READ MORE

This diagnostic trouble code is generated when the control software detects an excessively high current in the control unit for gear shifting (DirectDrive transmission). This might be due to a short circuit, overloaded circuit, or faulty control unit.

READ MORE