This error code indicates a data transfer problem between the FCC control software and PTA, PTD, or PTQ control software, suggesting an issue with the CAN bus or the transmitting control software. Such issues can result in incomplete or incorrect message exchanges, affecting system functionality.

READ MORE

This error code indicates a data transfer problem between the FCC control software and PTA, PTD, or PTQ control software, suggesting an issue with the CAN bus or the transmitting control software. This disruption can cause incorrect or incomplete message exchanges, affecting overall system performance.

READ MORE

This error code indicates a data transfer problem between the FCC control software and PTA, PTD, or PTQ control software, suggesting an issue with the CAN bus or the transmitting control software.

READ MORE

This error code is generated when the control software registers that the current at the output to the wake-up signal is too high, indicating a short circuit to ground.

READ MORE

This error code is generated when the control software registers an unrealistic value, such as both the left and right turn signals being activated simultaneously. This indicates a malfunction in the turn-signal lever or an issue in the signal processing circuit.

READ MORE

This error code is generated when the control software receives several implausible input signals from the light switch simultaneously. This typically indicates a defective light switch or a fault in the circuit.

READ MORE

This error code is generated if the control software receives several implausible input signals from the rear window wiper switch simultaneously. This indicates a potential defect in the wiper switch or a fault in the electrical circuit.

READ MORE

This error code is generated if the control software receives signals from an undefined position of the reverse drive lever (intermediate position) over an extended period. It occurs when one park lock switch (corner park or center park) signal is received along with the neutral switch or power zero switch signal for too long. This…

READ MORE

This error code is triggered if the control software receives a switch combination from an undefined position of the reverse drive lever over an extended period. This condition occurs when signals from a direction switch (forward or reverse) are received together with signals from a movement switch or power-zero switch for too long. It may…

READ MORE

This error code indicates that the control software has registered incorrect values when the reverse drive lever is in the neutral or reverse position. This could be due to sensor malfunctions, wiring issues, or calibration errors within the reverse drive lever mechanism.

READ MORE

This error code is generated when the control software detects two positions of the reverse drive lever simultaneously. This indicates a malfunction in the position sensors or an issue with the control software interpreting the lever’s position.

READ MORE