This error code, TID 523922.31, indicates that the emergency brake is active while the tractor is driving or is not in neutral. This is a critical safety issue that requires immediate attention.

READ MORE

This error code, TID 522390.11, is generated when the control software detects that the come-home mode is activated on tractors with DirectDrive transmission. Activation of come-home mode deactivates all functions of Tractor-Implement Automation™.

READ MORE

This error code, TID 522390.09, is generated when the control software detects that no valid information from the implement is received via the implement CAN Bus. This indicates a communication issue between the tractor and the implement.

READ MORE

This error code, TID 522149.31, indicates that the control software detects a command from another control software to limit travel speed. This typically happens due to safety protocols or operational constraints.

READ MORE

This error code, TID 522149.14, is generated when the control software detects that a command to limit travel speed has been issued. This can occur due to various operational conditions requiring reduced speed for safety or performance reasons.

READ MORE

This error code, TID 520959.14, indicates that shifting the transmission is not permitted because no valid operator presence signal is detected. This may occur if the operator is not seated or if there is an electrical fault in the circuit of the operator presence switch.

READ MORE

This error code, TID 520958.31, indicates that shifting the transmission is not permitted because the maximum travel speed set on the CommandCenter™ will be exceeded. This is a safety measure to ensure that the vehicle does not exceed its designated maximum speed.

READ MORE

This error code, TID 520958.14, is generated when the control software detects that shifting the transmission to the selected range is not permitted because another control software has commanded a limitation of travel speed. This is typically a safety feature to prevent damage to the transmission or unsafe operating conditions.

READ MORE

This error code, TID 520872.02, indicates an internal error in the control software related to the EEPROM module. The control software detects a problem reading data from the EEPROM, which can be caused by data corruption, hardware malfunction, or other internal issues.

READ MORE

This error code, TID 520871.02, indicates an internal error in the control software related to the EEPROM module. Similar to TID 520870.02, this error occurs when the control software encounters a problem reading data from the EEPROM.

READ MORE

This error code, TID 520870.02, is generated when the control software detects an error reading the internal module (EEPROM). EEPROM errors can occur due to data corruption, hardware malfunctions, or other internal issues.

READ MORE