This error code, SCO 523272.02, indicates a fault in the remote control switch of the front hitch. This may point to a defective switch or a defective circuit.

READ MORE

This error code, SCO 523217.04, indicates that the voltage for E-SCV XII is below 9 volts, suggesting a short to ground. Insufficient voltage can prevent the components from operating correctly.

READ MORE

This error code, SCO 523217.03, indicates that the circuit voltage for E-SCV XII is too high, suggesting a circuit is open or shorted to 12 volts. Excessive voltage can damage the components and prevent them from functioning correctly.

READ MORE

This error code, SCO 523216.04, indicates that the voltage for E-SCV X and E-SCV XI is below 9 volts, suggesting a short to ground. Insufficient voltage can prevent the components from operating correctly.

READ MORE

This error code, SCO 523216.03, indicates that the circuit voltage for E-SCV X and E-SCV XI is too high, suggesting a circuit is open or shorted to 12 volts. Excessive voltage can damage the components and prevent them from functioning correctly.

READ MORE

This error code, SCO 522390.11, is generated if the come-home mode has been activated for a tractor with AutoPowr™/IVT™ transmission. This deactivates all functions of the Tractor-Implement Automation™.

READ MORE

This error code, SCO 522390.09, is issued when non-valid information is received from the implement via the CAN BUS implement. This indicates a communication issue between the tractor and the implement.

READ MORE

This error code, SCO 522164.31, indicates that no signal has been received from the operator presence switch for more than 1 second while E-SCV X is activated. The operator presence switch is crucial for ensuring the operator is in control when the selective control valve is in use.

READ MORE

This error code, SCO 522163.31, indicates that no signal has been received from the operator presence switch for more than 1 second while E-SCV XI is activated. The operator presence switch is crucial for ensuring the operator is in control when the selective control valve is in use.

READ MORE

This error code, SCO 522162.31, indicates that no signal has been received from the operator presence switch for more than 1 second while E-SCV XIII is activated. The operator presence switch is crucial for ensuring the operator is in control when the selective control valve is in use.

READ MORE

This error code, SCO 522161.31, indicates that no signal has been received from the operator presence switch for more than 1 second while E-SCV XII is activated. The operator presence switch is crucial for ensuring the operator is in control when the selective control valve is in use.

READ MORE