Description:

This operator information (diagnostic trouble code) is generated when the come-home mode is activated (plug for come-home function in COME-HOME position). The operator is informed to move the reverse drive lever to its neutral or park position to access the next stage of the come-home function.

Reaction:

When this fault is detected, the control software may exhibit limited or no functionality, guiding the operator to move the reverse drive lever appropriately.

Recommendations:

• Verify Come-Home Mode Activation:
  • Ensure the come-home mode plug is correctly positioned in the COME-HOME position.
  • Check for any faults or errors in the activation mechanism.
• Operator Instruction:
  • Instruct the operator to move the reverse drive lever to the neutral or park position as required.
• Inspect Reverse Drive Lever Mechanism:
  • Check the reverse drive lever for proper operation and any signs of malfunction.
  • Repair or replace the lever if necessary.
• Reset Control Module:
  • Perform a soft reset of the control module by cycling the power to clear any transient errors.

Note:

Proper use of the come-home mode and adherence to the required procedures can ensure smooth operation and functionality of the tractor in this mode.