Description:

This diagnostic trouble code, TSC 523972.13, is triggered when, at the end of calibration, the TSC (cab suspension) detects a level position voltage that is out of range (i.e., not between 2 and 3 volts).

Reaction:

When this error occurs, the cab suspension may not level correctly, potentially leading to operational issues and discomfort.

Recommendations:

Inspect Cab Position Sensor:

• Check Sensor Output:
  • Verify that the signal output of the cab position sensor B110 falls within the 2-3 volts range when the cab suspension is in the level position.
  • Recalibrate or replace the sensor if necessary.

Inspect Sensor Circuit:

• Check for Circuit Issues:
  • Examine the wiring and connections of the cab position sensor for any signs of damage, loose connections, or corrosion.
  • Repair or replace any faulty components in the circuit.

Verify Calibration Process:

• Ensure Correct Calibration Procedure:
  • Follow the manufacturer’s instructions for the calibration process.
  • Ensure all necessary conditions (engine speed, tractor stationary) are met during calibration.

Note:

Ensuring the cab suspension reaches the correct level position voltage is crucial for proper operation. Regular inspections and maintenance of the cab position sensor and its circuit are essential.