John Deere News & Innovations: Equipment, Technology, Solutions

Exploring the World of John Deere: Insights, News, Tips, and Expertise

Home » John Deere fault codes » UIC codes » Page 8

UIC codes

Comprehensive Guide to John Deere UIC Fault Codes

Understanding John Deere UIC fault codes is crucial for maintaining and troubleshooting your equipment. These codes, also known as John Deere UIC diagnostic trouble codes or John Deere UIC error codes, help identify specific issues within the UIC control unit, which is responsible for managing the transmission control with AutoPowr/IVT transmission.

Common John Deere UIC Fault Codes

Here are the five most frequently encountered John Deere UIC fault codes:

  1. UIC 524254.31 – Transmission Enable Relay Fault
    • Occurrence: This code appears when there is a problem with the transmission enable relay circuit (K06/03 or K02/03), indicating a defective relay or issues with the ground circuit (lead 6003) or control lead (6064).
    • Solution: Inspect and possibly replace the relay, check the ground circuit and control lead for damage or loose connections.
  2. UIC 524264.02 – Control Unit Internal Fault
    • Occurrence: This code is generated when an electronic malfunction is detected within the control unit.
    • Solution: Perform a hard reset, inspect connections, update software, or replace the control unit if necessary.
  3. UIC 600006.31 – Diagnostic Trouble Code Not Known
    • Occurrence: Triggered by the CommandCenter (DTI) when it receives a UIC code that is not stored in its memory.
    • Solution: Update the CommandCenter software, inspect CAN BUS wiring, and consult technical support if needed.
  4. UIC 524166.02 – Brake Pedal Sensor Unit Fault at Right Pedal
    • Occurrence: Occurs when the right brake pedal switch is not actuated properly, indicated by incorrect voltage readings at the right brake pedal potentiometer.
    • Solution: Inspect the brake pedal sensor unit, verify switch signals, check wiring, and replace faulty components.
  5. UIC 524173.02 – Clutch Pedal Potentiometer Voltage Ratio Error
    • Occurrence: Detected when there is a mismatch between the output signals of the clutch pedal potentiometer, where the voltage at channel 1 must be double that of channel 2.
    • Solution: Inspect the clutch pedal potentiometer, verify signal accuracy, and check wiring connections.

Importance of Understanding UIC Error Codes

John Deere UIC error codes play a pivotal role in the maintenance and repair of John Deere equipment. By identifying the exact nature of the issue, these codes enable quick and effective troubleshooting, ensuring minimal downtime and maintaining optimal performance of your machinery.

Where These Codes Occur:

  • Transmission Systems: Fault codes often appear in the transmission control unit, impacting the AutoPowr/IVT transmission.
  • Brake and Clutch Systems: Errors related to pedal sensors and potentiometers frequently occur here.
  • Control Units: Internal faults and communication issues within control units are common sources of these codes.

Regularly updating your diagnostic tools and staying informed about common fault codes can significantly enhance your ability to maintain John Deere equipment effectively. Always refer to the official John Deere manuals and technical support for comprehensive diagnostics and solutions.

Categories

John Deere Parts

Recent Posts

John Deere Logo

John Deere fault codes:

ACU codes AIC codes ATC codes BCU codes BIF codes BRC codes CAB codes CCU codes CLC codes CSC codes DTI codes ECU codes EPC codes ETC codes GPM codes ICC codes JDL codes OIC codes PTA codes PTD codes PTF codes PTH codes PTI codes PTP codes PTQ codes PTR codes RLC codes RPT codes SCC codes SCO codes SIC codes SSU codes TCU codes TIA codes TIQ codes TSC codes UIC codes VTV codes XMC codes XSC codes