This error code, XSC 001807.20, is generated when the duty cycle at channel 1 of the steering wheel position sensor exceeds 99%. This high duty cycle suggests a potential malfunction of the sensor or its signal processing.

READ MORE

This error code, XSC 001807.18, is generated when the frequency at channel 1 of the steering wheel position sensor falls below 150 Hz. This low frequency suggests a potential issue with the sensor or its signal processing.

READ MORE

This error code, XSC 001807.16, is generated if a frequency of over 300 Hz is registered at channel 1 of the steering wheel position sensor. This high frequency indicates a potential issue with the sensor or signal processing.

READ MORE

This error code, XSC 001807.10, is generated if a speed of over 400 rpm is registered at channel 1 of the steering wheel position sensor. This high speed indicates a potential issue with the sensor or signal processing.

READ MORE

This error code, XSC 001504.31, indicates that no operator has been detected on the seat for more than 2 seconds while the AutoTrac function is activated. This safety feature prevents the vehicle from operating without an operator present.

READ MORE

This error code, XSC 001504.14, indicates that no operator has been detected on the seat for more than 7 seconds while the AutoTrac function is activated. This safety feature is designed to prevent the vehicle from operating without an operator…

READ MORE

This error code, XSC 001231.14, indicates a communication problem between the XSC control software and the XMC control software. This issue can be due to software bugs, hardware failures, or network problems, affecting the system’s ability to function correctly.

READ MORE

This error code, XSC 001231.12, indicates a communication problem between the XSC control software and the XMC control software. Such communication issues can result from software bugs, hardware failures, or network problems, disrupting the coordination necessary for proper system functionality.

READ MORE

This error code, XSC 001231.08, indicates a communication problem between the XSC control software and the XMC control software. This communication issue can arise from various factors, including software bugs, hardware failures, or network issues.

READ MORE

This error code, XSC 000709.21, indicates that the duty cycle at channel 2 of the steering wheel position sensor is less than 1%. Despite this low duty cycle, the value measured by the XMC control software is within the acceptable…

READ MORE

This error code, XSC 000709.20, is triggered when the duty cycle at channel 2 of the steering wheel position sensor exceeds 99%. Despite this high duty cycle, the value measured by the XMC control software is within the acceptable range,…

READ MORE