This error code is generated when the control software detects that the signal voltage in the circuit of the declutch switch on the range shift lever is too low when the switch is actuated. Possible reasons include a defective declutch switch, a signal voltage shorted to ground, or an open circuit.

READ MORE

This error code is generated when the control software detects that the signal voltage in the circuit of the declutch switch on the range shift lever is too high when the switch is actuated. Possible reasons include a defective declutch switch, a signal voltage short-circuited to system voltage, or an open ground connection.

READ MORE

This error code is generated when the control software detects that the voltage difference between the declutch switch on the range shift lever and the tractor system voltage is too high when the switch is actuated. This indicates a potential problem with the declutch switch, which may be faulty, dirty, or worn.

READ MORE

This error code indicates that the voltage at the remote control switch for E-SCVs is too low, suggesting a short to ground.

READ MORE

This error code indicates that the voltage at the remote control switch for E-SCVs is too high, suggesting a short to a supply lead.

READ MORE

This error code indicates that the voltage at the front-wheel drive switch exceeds 5 volts, suggesting a short to a supply lead.

READ MORE

This error code indicates that the left brake pedal sensor unit is transmitting too many incorrect signals to the control software due to missing XMB/XMC messages on the CAN Bus.

READ MORE

This error code is generated when the left brake pedal sensor unit transmits an incorrect signal to the control software. This can occur due to a frozen heartbeat from XMB/XMC control units, indicating communication issues.

READ MORE

This error code is generated if the control software detects that the current on the CAN BUS is too high, indicating a short circuit to ground.

READ MORE

This error code is generated if the control software detects that the voltage on the CAN BUS is too low, indicating a short circuit to ground.

READ MORE

This error code is generated if the control software detects that the voltage on the CAN BUS is too high, indicating a short to a supply lead.

READ MORE