This diagnostic trouble code (DTC) is generated when an error occurs while reading the internal module (EEPROM) of the control software. This indicates a potential issue with the EEPROM or its connection to the control unit.

READ MORE

This diagnostic trouble code (DTC) is generated when an electronic malfunction is registered in the control software. This indicates a problem within the control software that affects its normal operation.

READ MORE

This diagnostic trouble code (DTC) is generated when the come-home mode is activated for a tractor with AutoPowr/IVT transmission™. This mode deactivates all functions of the Tractor-Implement Automation™, indicating a malfunction in the automation system.

READ MORE

This diagnostic trouble code (DTC) is issued when invalid information is received from the implement via the CAN BUS. This indicates a communication issue between the tractor and the implement.

READ MORE

This diagnostic trouble code (DTC) is triggered when the reverse drive lever is in the forward position, but the Tractor-Implement Automation™ is not yet ready to start. To restart the system, the reverse drive lever must be moved to the neutral position and then put back into the forward position.

READ MORE

This diagnostic trouble code (DTC) is triggered when the Tractor-Implement Automation™ detects that the operator is no longer present for 7 seconds or more. This safety feature deactivates the automation to prevent unintended operation.

READ MORE

This diagnostic trouble code (DTC) is generated when the come-home mode is activated for a tractor with AutoPowr/IVT transmission™. This deactivates all functions of the Tractor-Implement Automation™, indicating a malfunction in the automation system.

READ MORE

This diagnostic trouble code (DTC) is issued when no valid information is received from the implement, or if the implement has disabled the automation while the tractor was stationary. This code indicates a communication problem between the tractor and the implement, leading to a disruption in automation functions.

READ MORE

This diagnostic trouble code (DTC) is generated when the control software measures a voltage below 4.75 V at the positive voltage supply for 5-volt components. This indicates a short circuit to ground.

READ MORE

This diagnostic trouble code (DTC) is generated when the control software measures a voltage above 5.25 V at the positive voltage supply for 5-volt components. This indicates a short circuit to a positive lead.

READ MORE

This diagnostic trouble code (DTC) is generated when the control software detects multiple incorrect output signals from the 5-volt components. This indicates a problem with the 5-volt supply voltage. If related codes TIA 003509.03 or TIA 003509.04 are not stored, it suggests an issue with the ground lead for the 5-volt components.

READ MORE