This error code indicates that the Selective Control Valve Unit VI (SV VI) is not receiving the required messages from the SCC (Selective Control Communication). This issue can be due to communication faults, such as wiring issues, faulty modules, or software problems.

READ MORE

This error code indicates that the switched supply voltage to the Selective Control Valve Unit VI (SV VI) has dropped below 9.0 V. This low voltage condition can be caused by a weak battery, poor electrical connections, or a malfunctioning alternator.

READ MORE

This error code indicates that the switched supply voltage to the Selective Control Valve Unit VI (SV VI) has exceeded 16.0 V. This high voltage condition can be due to several factors, such as an overcharging alternator, a faulty voltage regulator, or wiring issues.

READ MORE

This error code indicates that the software for the Selective Control Valve Unit V (SV V) failed to execute within the allotted time. This can be caused by software bugs, hardware failures, or communication issues within the control unit.

READ MORE

This error code indicates that the Selective Control Valve V (SV V) is not in the NEUTRAL position. This can be caused by mechanical issues, incorrect control signals, or moving the control lever with the key on and engine off.

READ MORE

This error code indicates that the Selective Control Valve V (SV V) spool is undershooting its desired position. This can be caused by hydraulic pressure issues, mechanical wear, or control signal errors.

READ MORE

This error code indicates that the Selective Control Valve V (SV V) spool is overshooting its desired position. This can be caused by hydraulic pressure issues, mechanical wear, or control signal errors.

READ MORE

This error code indicates that the Selective Control Valve V (SV V) is not reaching the FLOAT position. This can occur due to mechanical obstructions, control signal issues, or faults within the control valve unit.

READ MORE

This error code indicates that the Selective Control Valve Unit V (SV V) is not receiving the required messages from the SCC (Selective Control Coordinator). This communication failure can be due to issues in the CAN bus network, wiring problems, or faults within the control units.

READ MORE

This error code is generated when the switched supply voltage to the Selective Control Valve Unit V (SV V) falls below 9.0 V. This typically occurs due to an undervoltage condition in the electrical system supplying the SV V.

READ MORE

This error code is generated when the switched supply voltage to the Selective Control Valve Unit V (SV V) exceeds 16.0 V. This situation typically occurs due to an overvoltage condition in the electrical system supplying the SV V.

READ MORE