This error code, SIC 523889.18, is generated when the system voltage (battery voltage) at the stepper motor of ESCV 3 (Electro-Hydraulic Section Control Valve) is between 9 and 11 volts, and the hydraulic oil temperature is between 25°C (13°F) and 15°C (5°F).

READ MORE

This error code, SIC 523889.04, is generated when the temperature of the stepper motor of ESCV 3 (Electro-Hydraulic Section Control Valve) is less than 45°C (49°F).

READ MORE

This error code, SIC 523889.03, is generated when a temperature of more than 100°C (212°F) is measured at the stepper motor of ESCV 3 (Electro-Hydraulic Section Control Valve). The stepper motor does not become operable again until the temperature drops below 100°C (212°F).

READ MORE

This error code, SIC 523888.18, is generated when the system voltage (battery voltage) at the stepper motor of ESCV 2 (Electro-Hydraulic Section Control Valve) is between 9 and 11 volts, and the hydraulic oil temperature is between 25°C (13°F) and 15°C (5°F).

READ MORE

This error code, SIC 523888.04, is generated when the temperature of the stepper motor of ESCV 2 (Electro-Hydraulic Section Control Valve) is less than 45°C (49°F).

READ MORE

This error code, SIC 523888.03, is generated when a temperature of more than 100°C (212°F) is measured at the stepper motor of ESCV 2 (Electro-Hydraulic Section Control Valve). The stepper motor does not become operable again until the temperature drops below 100°C (212°F).

READ MORE

This error code, SIC 523887.18, is generated when the system voltage (battery voltage) at the stepper motor of ESCV 1 (Electro-Hydraulic Section Control Valve) is between 9 and 11 volts, and the hydraulic oil temperature is between 25°C (13°F) and 15°C (5°F).

READ MORE

This error code, SIC 523887.04, is generated when the temperature of the stepper motor of ESCV 1 (Electro-Hydraulic Section Control Valve) is less than 45°C (49°F).

READ MORE

This error code, SIC 523887.03, is generated when a temperature of more than 100°C (212°F) is measured at the stepper motor of ESCV 1 (Electro-Hydraulic Section Control Valve). The stepper motor does not become operable again until the temperature drops below 100°C (212°F).

READ MORE

This error code, SIC 523886.01, is generated when the system voltage (battery voltage) at the stepper motor of EICV 3 (Electro-Hydraulic Integrated Control Valve) is less than 9 volts.

READ MORE

This error code, SIC 523886.00, is generated when the system voltage (battery voltage) at the stepper motor of EICV 3 (Electro-Hydraulic Integrated Control Valve) exceeds 16 volts.

READ MORE