This error code, SIC 523885.01, is generated when the system voltage (battery voltage) at the stepper motor of EICV 2 (Electro-Hydraulic Integrated Control Valve) is less than 9 volts.

READ MORE

This error code, SIC 523885.00, is generated when the system voltage (battery voltage) at the stepper motor of EICV 2 (Electro-Hydraulic Integrated Control Valve) exceeds 16 volts.

READ MORE

This error code, SIC 523884.01, is generated when the system voltage (battery voltage) at the stepper motor of EICV 1 (Electro-Hydraulic Integrated Control Valve) is less than 9 volts.

READ MORE

This error code, SIC 523884.00, is generated when the system voltage (battery voltage) at the stepper motor of EICV 1 (Electro-Hydraulic Integrated Control Valve) exceeds 16 volts.

READ MORE

This error code, SIC 523871.18, is generated when the system voltage (battery voltage) at the stepper motor of EICV 3 (Electro-Hydraulic Integrated Control Valve) is between 9 and 11 volts, and the hydraulic oil temperature is between 25°C (13°F) and 15°C (5°F).

READ MORE

This error code, SIC 523871.04, is generated when the EICV 3 stepper motor measures a temperature of less than 45°C (49°F) at the coil.

READ MORE

This error code, SIC 523871.03, is generated when a temperature of more than 100°C (212°F) is measured at the EICV 3 (Electro-Hydraulic Integrated Control Valve) stepper motor. The stepper motor does not become operable again until the temperature drops below 100°C (212°F).

READ MORE

This error code, SIC 523870.18, is generated when the system voltage (battery voltage) at the stepper motor of EICV 2 (Electro-Hydraulic Integrated Control Valve) is between 9 and 11 volts, and the hydraulic oil temperature is between 25°C (13°F) and 15°C (5°F).

READ MORE

This error code, SIC 523870.04, is generated when the EICV 2 stepper motor measures a temperature of less than 45°C (49°F) at the coil.

READ MORE

This error code, SIC 523870.03, is generated when a temperature of more than 100°C (212°F) is measured at the EICV 2 (Electro-Hydraulic Integrated Control Valve) stepper motor. The stepper motor does not become operable again until the temperature drops below 100°C (212°F).

READ MORE

This error code, SIC 523869.18, is generated when the supply voltage at the stepper motor of EICV 1 (Electro-Hydraulic Integrated Control Valve) is between 9 and 11 volts, and the hydraulic oil temperature is between 25°C (13°F) and 15°C (5°F).

READ MORE