Description:

This diagnostic trouble code (DTC) is generated when the switch position of the clutch pedal switch, as transmitted by the PTA control software via a CAN message, does not match the actual position of the clutch pedal, determined by the signal from the clutch pedal potentiometer.

Reaction:

Limited or no function of the control software, affecting the clutch operation.

Recommendations:

Inspect Clutch Pedal Switch:

• Verify the physical condition and operation of the clutch pedal switch.
• Replace the clutch pedal switch if it is faulty or damaged.

Check Clutch Pedal Potentiometer:

• Inspect the clutch pedal potentiometer for proper function.
• Ensure the potentiometer is properly calibrated and replace if necessary.

Examine Wiring and Connections:

• Check all wiring and connectors between the clutch pedal switch, potentiometer, and control unit for any signs of damage, corrosion, or loose connections.
• Repair or replace any damaged wiring or connectors.

Verify CAN BUS Communication:

• Ensure the CAN BUS communication between the PTA control software and the clutch pedal components is functioning correctly.
• Repair any faults in the CAN BUS wiring or connections.

Consult Technical Support:

• If the issue persists, consult technical support for further diagnostic procedures or potential software updates.

Note:

Regular maintenance and checks of the clutch pedal components and related wiring can prevent malfunction issues. Keeping the system clean and free from debris can also help maintain proper operation.