This diagnostic trouble code is generated if a voltage higher than 16 volts is registered at the output to the heated rear window. This indicates that the circuit is shorted to a supply lead.

READ MORE

This diagnostic trouble code is generated if the control software detects a fault to ground. This indicates a problem in the ground circuit. The RLC control software shuts down its functions one after the other.

READ MORE

This diagnostic trouble code is generated if the control software registers that the current at the output to the turn-signal lights is too high. This indicates a short circuit to ground.

READ MORE

This diagnostic trouble code is generated if the control software registers that the current at the output to the right inner worklight on the rear of the roof or right Xenon (HID) worklight on the rear of the roof is too high. This indicates a short circuit to ground.

READ MORE

This diagnostic trouble code is generated if the control software registers that the current at the output to the right inner worklight on the rear of the roof or right Xenon (HID) worklight on the rear of the roof is too low. This indicates that the circuit is open.

READ MORE

This diagnostic trouble code is generated if a voltage higher than the expected value is registered at the output to the right inner worklight on the rear of the roof or right Xenon (HID) worklight on the rear of the roof. This indicates that the circuit is open or shorted to 12 volts.

READ MORE

This diagnostic trouble code is generated if the control software registers that the current at the output to the right outer worklight on the rear of the roof or right turn-signal light on the rear of the roof (SAE) is too high. This indicates a short circuit to ground.

READ MORE

This diagnostic trouble code is generated if the control software registers that the current at the output to the right outer worklight on the rear of the roof or right turn-signal light on the rear of the roof (SAE) is too low. This indicates that the circuit is open.

READ MORE

This diagnostic trouble code is generated if a voltage higher than the expected value is registered at the output to the right outer worklight on the rear of the roof or right turn-signal light on the rear of the roof (SAE). This indicates that the circuit is open or shorted to 12 volts.

READ MORE

This diagnostic trouble code is generated if the control software registers that the current at the output to the right side-facing worklight on the rear of the roof is too high. This indicates a short circuit to ground.

READ MORE

This diagnostic trouble code is generated if the control software registers that the current at the output to the right side-facing worklight on the rear of the roof is too low. This indicates that the circuit is open.

READ MORE