This error code, AIC 524224.09, indicates a communication issue between the Armrest Interface Control (AIC) software and the Rear PTO (RPT) control software. The fault involves a data transfer problem, which may be due to a malfunction within the Controller Area Network (CAN) bus system or an error in the transmitting control software. Such issues…

READ MORE

The error code AIC 524224.02 is triggered by a malfunction in the rear Power Take-Off (PTO) switch, where the ON and OFF contacts are incorrectly sending the same signal. This issue typically points to a defective circuit within the switch mechanism, potentially caused by a short, wiring fault, or internal switch failure, which prevents the…

READ MORE

This error code, AIC 524216.09, indicates a data transfer problem between the Armrest Interface Control (AIC) software and the Power Take-Off Front (PTF) control software, signifying a communication issue within the Controller Area Network (CAN) bus system. The problem may stem from faults in the CAN bus itself or issues within the transmitting control software,…

READ MORE

The error code AIC 524216.02 is triggered by a conflict within the front Power Take-Off (PTO) switch circuit, where both the ON and OFF positions of the switch are registering the same value. This anomaly suggests a fault in the circuit, such as a defective switch, wiring issues, or problems in the electrical connectivity, which…

READ MORE

This error code, AIC 524212.02, points to a conflict within the rear hitch control system, specifically between the lever switch and the sensor voltage from the depth-setting potentiometer. The discrepancy suggests that the physical position of the rear hitch control lever does not align with the electrical feedback provided by the sensor, which could lead…

READ MORE

The error code AIC 524105.02 indicates a conflict within the SCV II (Selective Control Valve II) system, where the detent switch on the SCV II control lever does not align with the sensor voltage readings from the E-SCV II sensor. This discrepancy means that the physical position of the control lever is not accurately reflected…

READ MORE

The error code AIC 524104.09 reflects a conflict within the SCV III (Selective Control Valve III) system, where the detent switch on the SCV III control lever is conflicting with the sensor voltage. This indicates that the lever’s mechanical position does not match the electrical signals being sent by the sensor. The issue can affect…

READ MORE

This error code, AIC 524104.02, indicates a malfunction in the SCV III (Selective Control Valve III) system, where there is a discrepancy between the position of the control lever’s detent switch and the voltage readings from the E-SCV III sensor. The mismatch suggests that the physical position of the control lever does not align with…

READ MORE

The error code AIC 524103.02 is triggered due to a conflict within the SCV IV (Selective Control Valve IV) system, where the detent switch on the control lever is not aligned with the sensor voltage readings from the E-SCV IV sensor. This mismatch indicates that the physical position of the control lever does not correspond…

READ MORE

This error code, AIC 524102.02, points to a conflict within the SCV V (Selective Control Valve V) system, specifically between the detent switch on the control lever and the sensor voltage readings from the E-SCV V sensor. There is a discrepancy indicating that the physical position of the control lever does not align with the…

READ MORE

This error code, AIC 524101.02, indicates a malfunction in the SCV VI (Selective Control Valve VI) system, where the detent switch on the control lever is conflicting with the sensor voltage readings from the E-SCV VI sensor. This discrepancy suggests that the physical position of the control lever does not align with the voltage signals…

READ MORE