This diagnostic trouble code, TSC 003509.03, is triggered when the voltage measured at the positive lead of the power supply to the 5-volt components (TLS position sensor B53 and TLS oil pressure sensor B167) exceeds 5.25 volts. This indicates a possible circuit short to a supply lead or an internal interruption at the TSC.

READ MORE

This diagnostic trouble code, TSC 002246.09, is generated when a data transfer problem occurs between the DSM (Data Storage Module) and TSC (Tractor Steering Controller). The reception of one of the DSM messages is intermittent or nonexistent, potentially due to a loose wire or other connection issues.

READ MORE

This diagnostic trouble code, TSC 002033.09, is generated when a data transfer problem occurs between the BCU and TSC. The reception of one of the BCU messages is intermittent or nonexistent, which could be due to a loose wire or other connection issues.

READ MORE

This diagnostic trouble code, TSC 002000.09, is generated when a data transfer problem occurs between the ECU and TSC. The reception of one of the ECU messages is intermittent or nonexistent, which could be due to a loose wire or other connection issues.

READ MORE

This diagnostic trouble code, TSC 001881.19, is triggered when the BCU (Brake Control Unit) transmits incorrect sensor status signals on the CAN BUS. These signals indicate either: The draft sensor is not available, likely due to incorrect configuration. The sensor signal is faulty, possibly due to a circuit problem at the draft sensor.

READ MORE

This diagnostic trouble code, TSC 001080.04, is triggered when the voltage measured at the positive lead of the power supply to the 5-volt components (cab position sensor B110) is below 4.65 volts. This indicates a short to ground in the circuit.

READ MORE

This diagnostic trouble code, TSC 001080.03, is triggered when the voltage measured at the positive lead of the power supply to the 5-volt components (cab position sensor B110) exceeds 5.25 volts. This indicates a possible circuit short to a supply lead or an internal interruption at the TSC.

READ MORE

This diagnostic trouble code, TSC 001079.04, is triggered when the voltage measured at the positive lead of the power supply to the 5-volt components (TLS position sensor B53 and TLS oil pressure sensor B167) is below 4.65 volts. This indicates a short to ground in the circuit.

READ MORE

This diagnostic trouble code, TSC 001079.03, is triggered when the voltage measured at the positive lead of the power supply to the 5-volt components (TLS position sensor B53 and TLS oil pressure sensor B167) exceeds 5.25 volts. This indicates a possible circuit short to a supply lead or an internal interruption at the TSC.

READ MORE

This diagnostic trouble code, TSC 000639.14, is triggered when the control unit receives a high number of incorrect CAN BUS messages or detects a general problem in the connection to the vehicle CAN BUS.

READ MORE

This diagnostic trouble code, TSC 000629.12, is triggered when an electronic malfunction is registered in the control unit due to an unexpected or incorrect reset at the TSC (Tractor Steering Controller).

READ MORE