This error code, XSC 000709.20, is triggered when the duty cycle at channel 2 of the steering wheel position sensor exceeds 99%. Despite this high duty cycle, the value measured by the XMC control software is within the acceptable range, indicating a potential issue with the sensor or its signal processing.

READ MORE

This error code, XSC 000709.18, indicates that the frequency registered at channel 2 of the steering wheel position sensor is below 150 Hz. Despite this low frequency, the value measured by the XMC control software is within the acceptable range, suggesting a potential issue with the sensor or signal processing.

READ MORE

This error code, XSC 000709.16, is generated when a frequency of over 300 Hz is registered at channel 2 of the steering wheel position sensor. Despite this high frequency, the value measured by the XMC control software is within the acceptable range, indicating a potential issue with the sensor or signal processing.

READ MORE

This error code, XSC 000709.10, indicates that a speed of over 400 rpm is registered at channel 2 of the steering wheel position sensor. Despite this high speed, the value measured by the XMC control software is within the acceptable range, suggesting a potential issue with the sensor or signal processing.

READ MORE

This error code, XSC 000708.21, indicates that the duty cycle at channel 1 of the steering wheel position sensor is less than 1%. Despite this, the value measured by the XMC control software is within the acceptable range, suggesting a potential issue with the sensor or signal processing.

READ MORE

This error code, XSC 000708.20, is triggered when the duty cycle at channel 1 of the steering wheel position sensor exceeds 99%. Despite this, the value measured by the XMC control software remains within the acceptable range, indicating a potential issue with the sensor or signal processing.

READ MORE

This error code, XSC 000708.18, indicates that the frequency registered at channel 1 of the steering wheel position sensor is below 150 Hz. Despite this, the value measured by the XMC control software is within the acceptable range, suggesting a potential issue with the sensor or signal processing.

READ MORE

This error code, XSC 000708.16, is generated when a frequency of over 300 Hz is registered at channel 1 of the steering wheel position sensor. The value measured by the XMC control software is within the acceptable range, indicating a potential issue with the sensor or its signal processing.

READ MORE

This error code, XSC 000708.10, is triggered when a speed of over 400 rpm is registered at channel 1 of the steering wheel position sensor. Despite this, the value measured by the XMC control software is within the acceptable range. This discrepancy may indicate an issue with the steering wheel position sensor or the signal…

READ MORE

This error code, XSC 000704.09, indicates that a fault occurred during the launch of the control software. This fault may be caused by issues such as corrupted software files, hardware incompatibilities, or system resource limitations.

READ MORE

This error code, XSC 000701.02, indicates that the control unit is connected to an incorrect harness, which is incompatible with the steering control unit (AutoTrac™). This misconnection can lead to communication failures and improper operation of the steering system.

READ MORE