CSC codes John Deere Error - Page 2 of 6 - John Deere News & Innovations: Equipment, Technology, Solutions

CSC codes

John Deere CSC Fault Codes / CSC Error Codes: Comprehensive Guide

Welcome to our detailed archive of John Deere CSC fault codes and John Deere CSC diagnostic trouble codes. Understanding these codes is essential for maintaining the efficiency and comfort of your John Deere machinery, particularly focusing on the cab suspension and climate control systems.

Overview of CSC Control Software

The Comfort System Controller (CSC) control software plays a crucial role in managing the cab suspension of John Deere equipment. Integrated within the rear chassis control unit, the CSC control software interfaces with various sensors and components to ensure optimal performance and operator comfort. Key components controlled by the CSC software include:

Cab Position Sensor: Monitors the position of the cab to adjust suspension settings.
Solenoid Valve for Lowering Cab Suspension: Regulates the lowering of the cab suspension.
Solenoid Valve for Raising Cab Suspension: Manages the raising of the cab suspension.
Proportional Solenoid Valve for Cab Suspension: Ensures smooth and proportional control of the cab suspension.

Importance of CSC Fault Codes

John Deere CSC fault codes, also known as CSC diagnostic trouble codes, are vital for diagnosing and resolving issues within the comfort system controller. These codes provide insights into various malfunctions, helping technicians and operators to quickly identify and address problems. Common CSC codes pertain to issues with the cab position sensor, solenoid valves, and overall suspension system, which can significantly affect the machine’s performance and operator comfort.

Common CSC Error Codes and Their Implications

CSC 523973.18 – Bleeding (Cab Suspension), Level Position Not Reached
- Description: The cab suspension fails to reach the middle position during bleeding within the directed time.
- Solution: Inspect the hydraulic system, check solenoid valves, and perform the bleeding procedure again.
CSC 523973.31 – Cab Moves in Wrong Direction During Calibration
- Description: The cab moves incorrectly during calibration, indicating potential issues with solenoid valve connections or the hydraulic circuit.
- Solution: Verify solenoid valve connections, inspect the hydraulic circuit, and restart the calibration process.
CSC 524157.19 – Incorrect CAN Bus Message, Right Brake Pedal
- Description: The signal from the right brake pedal sensor is incorrect or missing.
- Solution: Inspect the brake pedal sensor and wiring harness for faults.
CSC 524165.19 – Incorrect CAN Bus Message, Clutch
- Description: The clutch potentiometer signal is incorrect or missing.
- Solution: Diagnose related codes, inspect the wiring harness, and test the clutch potentiometer.
CSC 524167.19 – Incorrect CAN Bus Message, Transmission
- Description: There is a mismatch between actual and commanded transmission speeds.
- Solution: Inspect transmission control units and sensors, and verify CAN bus communication.

Maintaining Your John Deere Comfort System

Regular maintenance and timely resolution of CSC fault codes are crucial for ensuring the optimal performance of your John Deere machinery. By understanding and addressing these diagnostic trouble codes, you can prevent potential issues, enhance operator comfort, and maintain the overall efficiency of your equipment.

Stay tuned to our archive for the latest updates and comprehensive guides on John Deere CSC fault codes and John Deere CSC diagnostic trouble codes. Keeping your machinery in top condition has never been easier!

CSC 523973.10 – Cab Suspension Fails to Reach Level Position or End Stops in Target Time During Calibration. John Deere System Advisory.
John Deere CSC codes
Error code CSC 523973.10 indicates that during the calibration of the cab suspension, the system fails to reach the level position or end stops within the specified time limit. This condition may suggest a fault in the raise/lower solenoid valves.
READ MORE
CSC 523973.07 – Cab Suspension Does Not Reach Level Position in Target Time. John Deere System Advisory.
John Deere CSC codes
This error code CSC 523973.07 occurs when the cab suspension fails to reach the level position within five minutes while traveling at speeds above 10 km/h (6 mph). This issue may indicate a fault in the raise/lower solenoid valves.
READ MORE
CSC 523973.04 – Cab Suspension All the Way Down, Voltage Too Low During Calibration. John Deere System Advisory.
John Deere CSC codes
Error code CSC 523973.04 is generated when the voltage at the signal output of the cab suspension sensor is too low (below 0.25 volts) during calibration or bleeding and calibration, when the cab suspension is at its lowest position. This…
READ MORE
CSC 523973.03 – Cab Suspension All the Way Up, Voltage Too High During Calibration. John Deere System Advisory.
John Deere CSC codes
Error code CSC 523973.03 indicates that during the calibration or bleeding and calibration process, the voltage at the signal output of the cab suspension sensor is too high (above 4.75 volts) when the cab suspension is at its highest position.…
READ MORE
CSC 523973.02 – Cab Position Out of Valid Range During Calibration. John Deere System Advisory.
John Deere CSC codes
Error code CSC 523973.02 is generated when the control software detects that the cab suspension sensor’s mid-position voltage is outside the valid range of 2 to 3 volts during calibration or bleeding and calibrating. This indicates that the cab position…
READ MORE
CSC 523949.06 – High Current in Solenoid Valve for Raising Cab Suspension. John Deere System Advisory.
John Deere CSC codes
Error code CSC 523949.06 is triggered when the control software detects that the current in the circuit of the solenoid valve for raising the cab suspension is too high. This condition typically indicates a short to ground, which can lead…
READ MORE
CSC 523949.05 – Low Current in Solenoid Valve for Raising Cab Suspension. John Deere System Advisory.
John Deere CSC codes
Error code CSC 523949.05 is generated when the current in the circuit of the solenoid valve for raising the cab suspension is too low. This condition can be caused by an open circuit, which can prevent the solenoid valve from…
READ MORE
CSC 523949.03 – High Voltage in Solenoid Valve for Raising Cab Suspension. John Deere System Advisory.
John Deere CSC codes
The error code CSC 523949.03 is detected when the solenoid valve supply voltage for raising the cab suspension is too high, typically indicating a short to a 12-volt source. This condition can impair the functionality of the solenoid valve and…
READ MORE
CSC 523948.06 – High Current in Solenoid Valve for Lowering Cab Suspension. John Deere System Advisory.
John Deere CSC codes
Error code CSC 523948.06 is triggered when the control software detects that the current in the circuit of the solenoid valve for lowering the cab suspension is too high. This typically indicates a short to ground, which can lead to…
READ MORE
CSC 523948.05 – Low Current in Solenoid Valve for Lowering Cab Suspension. John Deere System Advisory.
John Deere CSC codes
Error code CSC 523948.05 is generated when the current in the circuit of the solenoid valve for lowering the cab suspension is too low. This condition can be caused by an open circuit or over-temperature, which can impede the solenoid…
READ MORE
CSC 523948.03 – High Voltage in Solenoid Valve for Lowering Cab Suspension. John Deere System Advisory.
John Deere CSC codes
The error code CSC 523948.03 is triggered when the solenoid valve supply voltage for lowering the cab suspension is too high, typically indicating a short to a 12-volt source. This condition can impair the functionality of the solenoid valve and…
READ MORE

John Deere News & Innovations: Equipment, Technology, Solutions

CSC codes

John Deere CSC Fault Codes / CSC Error Codes: Comprehensive Guide

Overview of CSC Control Software

Importance of CSC Fault Codes

Common CSC Error Codes and Their Implications

Maintaining Your John Deere Comfort System

CSC 523973.10 – Cab Suspension Fails to Reach Level Position or End Stops in Target Time During Calibration. John Deere System Advisory.

CSC 523973.07 – Cab Suspension Does Not Reach Level Position in Target Time. John Deere System Advisory.

CSC 523973.04 – Cab Suspension All the Way Down, Voltage Too Low During Calibration. John Deere System Advisory.

CSC 523973.03 – Cab Suspension All the Way Up, Voltage Too High During Calibration. John Deere System Advisory.

CSC 523973.02 – Cab Position Out of Valid Range During Calibration. John Deere System Advisory.

CSC 523949.06 – High Current in Solenoid Valve for Raising Cab Suspension. John Deere System Advisory.

CSC 523949.05 – Low Current in Solenoid Valve for Raising Cab Suspension. John Deere System Advisory.

CSC 523949.03 – High Voltage in Solenoid Valve for Raising Cab Suspension. John Deere System Advisory.

CSC 523948.06 – High Current in Solenoid Valve for Lowering Cab Suspension. John Deere System Advisory.

CSC 523948.05 – Low Current in Solenoid Valve for Lowering Cab Suspension. John Deere System Advisory.

CSC 523948.03 – High Voltage in Solenoid Valve for Lowering Cab Suspension. John Deere System Advisory.

Categories

Recent Posts

John Deere fault codes: