John Deere fault codes John Deere error - Page 322 of 349 - John Deere News & Innovations: Equipment, Technology, Solutions

John Deere fault codes

BRC 000630.13 – Calibration Failure in Brake Control Unit. John Deere System Advisory.
John Deere error BRC codes
The error code BRC 000630.13 is related to a significant issue in the Brake Control Unit (BRC), indicating that the system has not been calibrated or has failed to save the calibration settings properly. This fault can lead to inaccuracies in brake operation, potentially affecting the performance and safety of the machinery.
READ MORE
BRC 000629.12 – Software Execution Delay in Brake Control Unit. John Deere System Advisory.
John Deere error BRC codes
The error code BRC 000629.12 indicates a fault in the Brake Control Unit (BRC) where the software failed to execute within the allotted time. This type of error can suggest issues with software efficiency or processing delays within the BRC, potentially due to overloaded system tasks or software corruption.
READ MORE
BRC 000628.02 – Faulty Control Unit Configuration in Brake Control. John Deere System Advisory.
John Deere error BRC codes
This error code BRC 000628.02 pertains to an issue within the Brake Control Unit (BRC), indicating that the internal configuration memory is invalid. This error suggests that there might be a corruption or loss of vital configuration data, which is essential for the correct functioning of the brake system.
READ MORE
BRC 000168.04 – Low Unswitched Supply Voltage in Brake Control Unit. John Deere System Advisory.
John Deere error BRC codes
The error code BRC 000168.04 indicates a low unswitched supply voltage in the Brake Control Unit (BRC), where the voltage has fallen below the critical threshold of 9.0 volts. This condition refers to the constant power supply to the BRC, which is crucial for retaining settings and operating certain features even when the vehicle is…
READ MORE
BRC 000158.04 – Low Switched Supply Voltage in Brake Control Unit. John Deere System Advisory.
John Deere error BRC codes
The error code BRC 000158.04, related to the Brake Control Unit (BRC), signifies that the switched supply voltage has dropped below the threshold of 9.0 volts. This low voltage situation could affect the proper functioning of the brake control system, potentially impacting the vehicle’s braking capabilities.
READ MORE
ASU 524012.04 – Active Seat Position Sensor Circuit Voltage Low. John Deere System Advisory.
John Deere error ASU codes
Error code ASU 524012.04 is reported when the Active Seat Unit (ASU) in John Deere machinery detects that the voltage in the seat position sensor circuit is below 0.5 volts. This low voltage issue may be indicative of insufficient power supply, poor electrical connections, or a failing sensor, affecting the accurate detection and adjustment of…
READ MORE
ASU 524012.03 – Active Seat Position Sensor Circuit Voltage High. John Deere System Advisory.
John Deere error ASU codes
Error code ASU 524012.03 is triggered when the Active Seat Unit (ASU) in John Deere machinery detects that the voltage in the seat position sensor circuit exceeds 5.0 volts. This unusually high voltage reading can indicate issues such as an electrical overload, a malfunctioning sensor, or incorrect wiring, which could disrupt the accurate sensing of…
READ MORE
ASU 524011.08 – Active Seat Accelerometer Circuit Fault. John Deere System Advisory.
John Deere error ASU codes
Error code ASU 524011.08 occurs when the Active Seat Unit (ASU) in John Deere machinery detects no change in voltage in the seat accelerometer circuit despite active control commands. This condition implies a possible fault in the accelerometer or its circuitry, which could prevent the system from accurately detecting and responding to changes in seat…
READ MORE
ASU 524011.04 – Active Seat Accelerometer Circuit Voltage Low. John Deere System Advisory.
John Deere error ASU codes
Error code ASU 524011.04 is issued when the Active Seat Unit (ASU) in John Deere equipment detects a lower-than-normal voltage in the accelerometer circuit, specifically below 1.5 volts. This low voltage condition can indicate potential issues such as insufficient power supply, poor electrical connections, or a failing accelerometer, which could impair the seat’s motion and…
READ MORE
ASU 524011.03 – Active Seat Accelerometer Circuit Voltage High. John Deere System Advisory.
John Deere error ASU codes
Error code ASU 524011.03 indicates a fault in the accelerometer circuit of the Active Seat Unit (ASU) in John Deere machinery, characterized by an abnormally high voltage reading exceeding 4.5 volts. This high voltage in the accelerometer circuit could suggest issues such as electrical overcharge, faulty components, or improper circuit calibration affecting the seat’s stability…
READ MORE
ASU 524010.31 – Active Seat Raise/Lower Solenoid Circuit Fault. John Deere System Advisory.
John Deere error ASU codes
The error code ASU 524010.31 highlights a malfunction within the seat raise/lower solenoid circuit of the Active Seat Unit (ASU) in John Deere machinery. This fault occurs when the ASU detects electrical current in the solenoid circuit when it should be off, or fails to detect current when the solenoid is commanded on. Such anomalies…
READ MORE

John Deere News & Innovations: Equipment, Technology, Solutions

John Deere fault codes

BRC 000630.13 – Calibration Failure in Brake Control Unit. John Deere System Advisory.

BRC 000629.12 – Software Execution Delay in Brake Control Unit. John Deere System Advisory.

BRC 000628.02 – Faulty Control Unit Configuration in Brake Control. John Deere System Advisory.

BRC 000168.04 – Low Unswitched Supply Voltage in Brake Control Unit. John Deere System Advisory.

BRC 000158.04 – Low Switched Supply Voltage in Brake Control Unit. John Deere System Advisory.

ASU 524012.04 – Active Seat Position Sensor Circuit Voltage Low. John Deere System Advisory.

ASU 524012.03 – Active Seat Position Sensor Circuit Voltage High. John Deere System Advisory.

ASU 524011.08 – Active Seat Accelerometer Circuit Fault. John Deere System Advisory.

ASU 524011.04 – Active Seat Accelerometer Circuit Voltage Low. John Deere System Advisory.

ASU 524011.03 – Active Seat Accelerometer Circuit Voltage High. John Deere System Advisory.

ASU 524010.31 – Active Seat Raise/Lower Solenoid Circuit Fault. John Deere System Advisory.

Categories

Recent Posts

John Deere fault codes: