This error code indicates a fault in the park brake solenoid circuit. It can be caused by the installation of either fuse F24 or F28.

READ MORE

This code is caused by a clutch differential speed greater than 200 rpm, indicating a slipping clutch. If DTCs PTI 000754.18, PTI 000755.18, PTI 000756.18, or PTI 524239.31 are present, they should be diagnosed before proceeding with the current diagnosis.

READ MORE

This error code indicates that the transmission output speed has exceeded 8500 rpm for 3 seconds. The fault remains active until the output speed drops below 8300 rpm.

READ MORE

This code is triggered when the engine speed CAN parameter does not match the expected engine speed, which is calculated from the hydro ring gear speed and carrier speed inputs. If any ECU DTC is present, it should be diagnosed before proceeding with the current diagnosis.

READ MORE

This error code indicates that the engine speed has exceeded 2700 rpm for at least 1 second. The fault remains active until the engine speed drops below 2600 rpm. This code is informational and does not necessarily indicate a failure.

READ MORE

This code is for informational purposes, indicating that the transmission oil temperature is too low to perform calibration. The temperature is below -10°C (14°F).

READ MORE

This error code is generated when the PTI battery supply voltage drops below 8V.

READ MORE

This error code indicates that the ELX voltage is below 10V while the engine is running.

READ MORE

This error code is triggered when the transmission enable pressure drops below 1000 kPa (10 bar) or 145 psi while the engine is running and the oil temperature is above 20°C (68°F).

READ MORE