The CLC has detected that the current in the front left or right side roof flood lights exceeds the 7-amp fuse rating, likely due to a malfunction such as a short circuit. This condition could lead to electrical hazards such as wire melting or fire.

READ MORE

This error code indicates an open circuit condition in the front left or right side roof flood lights, leading to insufficient current flow. An open circuit typically indicates a break in the wiring or a disconnection, which prevents the flood lights from operating.

READ MORE

This fault code is triggered when the current in either the left or right mid-body flood lights circuit exceeds the 7-amp fuse rating. This issue can occur due to a short circuit or an overload in the flood lights, posing risks of overheating and potential damage to the electrical system.

READ MORE

This fault code occurs when the CLC detects an open circuit in the left or right mid-body flood lights, characterized by current levels below 500 milliamperes (0.5 amps). This suggests a disruption or failure in the circuit connectivity, leading to ineffective lighting.

READ MORE

This code is reported when the left or right rear roof flood lights circuit’s current exceeds the 7-amp fuse rating, detected by the Cab Load Center (CLC). Excessive current can indicate potential short circuits or malfunctions in the lighting system, which may lead to overheating and electrical hazards.

READ MORE

This fault code indicates that the Cab Load Center (CLC) control unit has detected an open circuit in the left or right rear roof flood lights, resulting in low current flow. An open circuit often suggests a disconnection or failure in the wiring or connectors, leading to non-operational flood lights.

READ MORE

This fault code, CLC 002050.06, is triggered when the Cab Load Center (CLC) control unit detects excessive load current: over 130 amps when the circuit board temperature is below 115 °C (239 °F) or over 100 amps when the temperature exceeds 115 °C (239 °F), for a duration longer than 2 seconds. This condition can…

READ MORE

This error code signifies that the sensor supply voltage within the Cab Load Center (CLC) is below 4.80 V. Low voltage to sensors can result in inadequate sensor performance, leading to incomplete or incorrect data being fed into the system controls.

READ MORE

The fault code CLC 001079.03 indicates that the sensor supply voltage in the Cab Load Center (CLC) exceeds 5.25 V. This elevated voltage could potentially damage sensors or affect their accuracy, leading to erroneous readings and impaired machine functions.

READ MORE

This error code is triggered when the software within the Cab Load Center (CLC) fails to execute within the designated time, potentially indicating a processing inefficiency or software overload. This delay can affect real-time operations and responses, which are critical for ensuring accurate control and monitoring.

READ MORE

This error code is reported when the Cab Load Center (CLC) is either in the process of programming or a programming attempt has failed. Such conditions can arise from disruptions during the update process, incorrect programming procedures, or compatibility issues with the software being installed.

READ MORE